000601489 001__ 601489
000601489 005__ 20250723171516.0
000601489 0247_ $$2doi$$a10.1007/s11661-023-07279-3
000601489 0247_ $$2ISSN$$a0026-086X
000601489 0247_ $$2ISSN$$a1073-5623
000601489 0247_ $$2ISSN$$a0360-2133
000601489 0247_ $$2ISSN$$a1543-1940
000601489 0247_ $$2ISSN$$a2379-0083
000601489 0247_ $$2ISSN$$a2379-0180
000601489 0247_ $$2datacite_doi$$a10.3204/PUBDB-2024-00219
000601489 0247_ $$2WOS$$aWOS:001136722500001
000601489 0247_ $$2openalex$$aopenalex:W4390605767
000601489 037__ $$aPUBDB-2024-00219
000601489 041__ $$aEnglish
000601489 082__ $$a530
000601489 1001_ $$0P:(DE-H253)PIP1090303$$aKlein, T.$$b0$$eCorresponding author
000601489 245__ $$aResidual Stresses in a Wire and Arc-Directed Energy-Deposited Al–6Cu–Mn (ER2319) Alloy Determined by Energy-Dispersive High-Energy X-ray Diffraction
000601489 260__ $$aBoston$$bSpringer$$c2024
000601489 3367_ $$2DRIVER$$aarticle
000601489 3367_ $$2DataCite$$aOutput Types/Journal article
000601489 3367_ $$0PUB:(DE-HGF)16$$2PUB:(DE-HGF)$$aJournal Article$$bjournal$$mjournal$$s1711368843_2270382
000601489 3367_ $$2BibTeX$$aARTICLE
000601489 3367_ $$2ORCID$$aJOURNAL_ARTICLE
000601489 3367_ $$00$$2EndNote$$aJournal Article
000601489 520__ $$aIn order to enable and promote the adoption of novel material processing technologies, a comprehensive understanding of the residual stresses present in structural components isrequired. The intrinsically high energy input and complex thermal cycle during arc-based additive manufacturing typically translate into non-negligible residual stresses. This studyfocuses on the quantitative evaluation of residual stresses in an Al–6Cu–Mn alloy fabricated by wire and arc-directed energy deposition. Thin, single-track aluminum specimens that differ in their respective height are investigated by means of energy-dispersive high-energy X-ray diffraction. The aim is to assess the build-up of stresses upon consecutive layer deposition. Stresses are evaluated along the specimen build direction as well as with respect to the lateral position within the component. The residual stress evolution suggests that the most critical region of the specimen is close to the substrate, where high tensile stresses close to the material’s yield strength prevail. The presence of these stresses is due to the most pronounced thermal gradients and mechanical constraints in this region.
000601489 536__ $$0G:(DE-HGF)POF4-6G3$$a6G3 - PETRA III (DESY) (POF4-6G3)$$cPOF4-6G3$$fPOF IV$$x0
000601489 536__ $$0G:(DE-H253)I-20211078-EC$$aFS-Proposal: I-20211078 EC (I-20211078-EC)$$cI-20211078-EC$$x1
000601489 542__ $$2Crossref$$i2024-01-05$$uhttps://creativecommons.org/licenses/by/4.0
000601489 542__ $$2Crossref$$i2024-01-05$$uhttps://creativecommons.org/licenses/by/4.0
000601489 588__ $$aDataset connected to CrossRef, Journals: bib-pubdb1.desy.de
000601489 693__ $$0EXP:(DE-H253)P-P61.1-20150101$$1EXP:(DE-H253)PETRAIII-20150101$$6EXP:(DE-H253)P-P61.1-20150101$$aPETRA III$$fPETRA Beamline P61.1$$x0
000601489 7001_ $$0P:(DE-H253)PIP1019516$$aSpoerk-Erdely, P.$$b1
000601489 7001_ $$0P:(DE-H253)PIP1097510$$aSchneider-Broeskamp, C.$$b2
000601489 7001_ $$0P:(DE-H253)PIP1018061$$aOliveira, J. P.$$b3
000601489 7001_ $$0P:(DE-H253)PIP1091310$$aAbreu Faria, G.$$b4
000601489 77318 $$2Crossref$$3journal-article$$a10.1007/s11661-023-07279-3$$bSpringer Science and Business Media LLC$$d2024-01-05$$n3$$p736-744$$tMetallurgical and Materials Transactions A$$v55$$x1073-5623$$y2024
000601489 773__ $$0PERI:(DE-600)2037517-7$$a10.1007/s11661-023-07279-3$$gVol. 55, no. 3, p. 736 - 744$$n3$$p736-744$$tMetallurgical and materials transactions / A$$v55$$x1073-5623$$y2024
000601489 8564_ $$uhttps://bib-pubdb1.desy.de/record/601489/files/s11661-023-07279-3.first.pdf$$yOpenAccess$$zStatID:(DE-HGF)0510
000601489 8564_ $$uhttps://bib-pubdb1.desy.de/record/601489/files/s11661-023-07279-3.first.pdf?subformat=pdfa$$xpdfa$$yOpenAccess$$zStatID:(DE-HGF)0510
000601489 8564_ $$uhttps://bib-pubdb1.desy.de/record/601489/files/s11661-023-07279-3.pdf$$yRestricted$$zStatID:(DE-HGF)0599
000601489 8564_ $$uhttps://bib-pubdb1.desy.de/record/601489/files/s11661-023-07279-3.pdf?subformat=pdfa$$xpdfa$$yRestricted$$zStatID:(DE-HGF)0599
000601489 909CO $$ooai:bib-pubdb1.desy.de:601489$$pdnbdelivery$$pdriver$$pVDB$$popen_access$$popenaire
000601489 9101_ $$0I:(DE-HGF)0$$6P:(DE-H253)PIP1090303$$aExternal Institute$$b0$$kExtern
000601489 9101_ $$0I:(DE-HGF)0$$6P:(DE-H253)PIP1019516$$aExternal Institute$$b1$$kExtern
000601489 9101_ $$0I:(DE-HGF)0$$6P:(DE-H253)PIP1097510$$aExternal Institute$$b2$$kExtern
000601489 9101_ $$0I:(DE-HGF)0$$6P:(DE-H253)PIP1018061$$aExternal Institute$$b3$$kExtern
000601489 9101_ $$0I:(DE-588b)16087541-9$$6P:(DE-H253)PIP1091310$$aHelmholtz-Zentrum Geesthacht$$b4$$kHZG
000601489 9101_ $$0I:(DE-588b)1231250402$$6P:(DE-H253)PIP1091310$$aHelmholtz-Zentrum Hereon$$b4$$kHereon
000601489 9131_ $$0G:(DE-HGF)POF4-6G3$$1G:(DE-HGF)POF4-6G0$$2G:(DE-HGF)POF4-600$$3G:(DE-HGF)POF4$$4G:(DE-HGF)POF$$aDE-HGF$$bForschungsbereich Materie$$lGroßgeräte: Materie$$vPETRA III (DESY)$$x0
000601489 9141_ $$y2024
000601489 915__ $$0StatID:(DE-HGF)0160$$2StatID$$aDBCoverage$$bEssential Science Indicators$$d2023-10-24
000601489 915__ $$0LIC:(DE-HGF)CCBY4$$2HGFVOC$$aCreative Commons Attribution CC BY 4.0
000601489 915__ $$0StatID:(DE-HGF)0113$$2StatID$$aWoS$$bScience Citation Index Expanded$$d2023-10-24
000601489 915__ $$0StatID:(DE-HGF)3002$$2StatID$$aDEAL Springer$$d2023-10-24$$wger
000601489 915__ $$0StatID:(DE-HGF)0510$$2StatID$$aOpenAccess
000601489 915__ $$0StatID:(DE-HGF)0420$$2StatID$$aNationallizenz$$d2024-12-17$$wger
000601489 915__ $$0StatID:(DE-HGF)0200$$2StatID$$aDBCoverage$$bSCOPUS$$d2024-12-17
000601489 915__ $$0StatID:(DE-HGF)0300$$2StatID$$aDBCoverage$$bMedline$$d2024-12-17
000601489 915__ $$0StatID:(DE-HGF)0199$$2StatID$$aDBCoverage$$bClarivate Analytics Master Journal List$$d2024-12-17
000601489 915__ $$0StatID:(DE-HGF)1150$$2StatID$$aDBCoverage$$bCurrent Contents - Physical, Chemical and Earth Sciences$$d2024-12-17
000601489 915__ $$0StatID:(DE-HGF)1160$$2StatID$$aDBCoverage$$bCurrent Contents - Engineering, Computing and Technology$$d2024-12-17
000601489 915__ $$0StatID:(DE-HGF)0150$$2StatID$$aDBCoverage$$bWeb of Science Core Collection$$d2024-12-17
000601489 915__ $$0StatID:(DE-HGF)0100$$2StatID$$aJCR$$bMETALL MATER TRANS A : 2022$$d2024-12-17
000601489 915__ $$0StatID:(DE-HGF)9900$$2StatID$$aIF < 5$$d2024-12-17
000601489 9201_ $$0I:(DE-H253)Hereon-20210428$$kHereon$$lHelmholtz-Zentrum Hereon$$x0
000601489 9201_ $$0I:(DE-H253)HAS-User-20120731$$kDOOR ; HAS-User$$lDOOR-User$$x1
000601489 980__ $$ajournal
000601489 980__ $$aVDB
000601489 980__ $$aUNRESTRICTED
000601489 980__ $$aI:(DE-H253)Hereon-20210428
000601489 980__ $$aI:(DE-H253)HAS-User-20120731
000601489 9801_ $$aFullTexts
000601489 999C5 $$1D Herzog$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.actamat.2016.07.019$$p371 -$$tActa Mater.$$uD. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann: Acta Mater., 2016, vol. 117, pp. 371–92.$$v117$$y2016
000601489 999C5 $$1J Sun$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.jmapro.2021.02.021$$p97 -$$tJ. Manuf. Process.$$uJ. Sun, J. Hensel, M. Köhler, and K. Dilger: J. Manuf. Process., 2021, vol. 65, pp. 97–111.$$v65$$y2021
000601489 999C5 $$1W Huang$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.jmapro.2022.08.010$$p434 -$$tJ. Manuf. Process.$$uW. Huang, Q. Wang, N. Ma, and H. Kitano: J. Manuf. Process., 2022, vol. 82, pp. 434–47.$$v82$$y2022
000601489 999C5 $$1T Lehmann$$2Crossref$$9-- missing cx lookup --$$a10.1080/09506608.2021.1971427$$p410 -$$tInt. Mater. Rev.$$uT. Lehmann, D. Rose, E. Ranjbar, M. Gasri-Khouzani, M. Tavakoli, H. Henein, T. Wolfe, and A.J. Qureshi: Int. Mater. Rev., 2022, vol. 67, pp. 410–59.$$v67$$y2022
000601489 999C5 $$1K Wandtke$$2Crossref$$9-- missing cx lookup --$$a10.1007/s40194-023-01503-9$$p987 -$$tWeld. World$$uK. Wandtke, D. Schroepfer, R. Scharf-Wildenhain, A. Haelsig, T. Kannengiesser, A. Kromm, and J. Hensel: Weld. World, 2023, vol. 67, pp. 987–96.$$v67$$y2023
000601489 999C5 $$1H Lockett$$2Crossref$$9-- missing cx lookup --$$a10.1080/09544828.2017.1365826$$p568 -$$tJ. Eng. Des.$$uH. Lockett, J. Ding, S. Williams, and F. Martina: J. Eng. Des., 2017, vol. 28, pp. 568–98.$$v28$$y2017
000601489 999C5 $$1Y Liu$$2Crossref$$9-- missing cx lookup --$$a10.1007/s00170-016-8466-y$$p647 -$$tInt. J. Adv. Manuf. Technol.$$uY. Liu, Y. Yang, and D. Wang: Int. J. Adv. Manuf. Technol., 2016, vol. 87, pp. 647–56.$$v87$$y2016
000601489 999C5 $$1T Simson$$2Crossref$$uT. Simson, A. Emmel, A. Dwars, and J. Böhm: Addit. Manuf., 2017, vol. 17, pp. 183–89.$$y2017
000601489 999C5 $$1W Zhang$$2Crossref$$uW. Zhang, D. Guo, L. Wang, C.M. Davies, W. Mirihanage, M. Tong, and N.M. Harrison: Addit. Manuf., 2023, vol. 61, p. 103275.$$y2023
000601489 999C5 $$1F Schmeiser$$2Crossref$$uF. Schmeiser, E. Krohmer, N. Schell, E. Uhlmann, and W. Reimers: Addit. Manuf., 2020, vol. 32, p. 101028.$$y2020
000601489 999C5 $$1J Schröder$$2Crossref$$9-- missing cx lookup --$$a10.1107/S1600576723004855$$p1076 -$$tJ. Appl. Crystallogr.$$uJ. Schröder, A. Evans, V. Luzin, G. Abreu Faria, S. Degener, E. Polatidis, J. Čapek, A. Kromm, G. Dovzhenko, and G. Bruno: J. Appl. Crystallogr., 2023, vol. 56, pp. 1076–90.$$v56$$y2023
000601489 999C5 $$1SW Williams$$2Crossref$$9-- missing cx lookup --$$a10.1179/1743284715Y.0000000073$$p641 -$$tMater. Sci. Technol.$$uS.W. Williams, F. Martina, A.C. Addison, J. Ding, G. Pardal, and P. Colegrove: Mater. Sci. Technol., 2016, vol. 32, pp. 641–47.$$v32$$y2016
000601489 999C5 $$1MDB Kumar$$2Crossref$$9-- missing cx lookup --$$a10.1007/s12540-022-01185-w$$p3033 -$$tMet. Mater. Int.$$uM.D.B. Kumar and M. Manikandan: Met. Mater. Int., 2022, vol. 28, pp. 3033–56.$$v28$$y2022
000601489 999C5 $$1CT Justus Panicker$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.matpr.2022.03.025$$p1119 -$$tMater. Today Proc.$$uC.T. Justus Panicker, K. Rohit Surya, and V. Senthilkumar: Mater. Today Proc., 2022, vol. 59, pp. 1119–26.$$v59$$y2022
000601489 999C5 $$1H Huang$$2Crossref$$uH. Huang, N. Ma, J. Chen, Z. Feng, and H. Murakawa: Addit. Manuf., 2020, vol. 34, p. 101248.$$y2020
000601489 999C5 $$1PA Colegrove$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.jmatprotec.2013.04.012$$p1782 -$$tJ. Mater. Process. Technol.$$uP.A. Colegrove, H.E. Coules, J. Fairman, F. Martina, T. Kashoob, H. Mamash, and L.D. Cozzolino: J. Mater. Process. Technol., 2013, vol. 213, pp. 1782–91.$$v213$$y2013
000601489 999C5 $$1JR Hönnige$$2Crossref$$uJ.R. Hönnige, P.A. Colegrove, S. Ganguly, E. Eimer, S. Kabra, and S. Williams: Addit. Manuf., 2018, vol. 22, pp. 775–83.$$y2018
000601489 999C5 $$1G Doumenc$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.mtla.2022.101520$$p101520 -$$tMaterialia$$uG. Doumenc, L. Couturier, B. Courant, P. Paillard, A. Benoit, E. Gautron, B. Girault, T. Pirling, S. Cabeza, and D. Gloaguen: Materialia, 2022, vol. 25, p. 101520.$$v25$$y2022
000601489 999C5 $$1J Ding$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.commatsci.2011.06.023$$p3315 -$$tComput. Mater. Sci.$$uJ. Ding, P. Colegrove, J. Mehnen, S. Ganguly, P.M.S. Almeida, F. Wang, and S. Williams: Comput. Mater. Sci., 2011, vol. 50, pp. 3315–22.$$v50$$y2011
000601489 999C5 $$1C Shen$$2Crossref$$uC. Shen, M. Reid, K.D. Liss, Z. Pan, Y. Ma, D. Cuiuri, S. van Duin, and H. Li: Addit. Manuf., 2019, vol. 29, p. 100774.$$y2019
000601489 999C5 $$1M Köhler$$2Crossref$$9-- missing cx lookup --$$a10.3390/met9050608$$p608 -$$tMetals (Basel)$$uM. Köhler, S. Fiebig, J. Hensel, and K. Dilger: Metals (Basel), 2019, vol. 9, p. 608.$$v9$$y2019
000601489 999C5 $$1DW Brown$$2Crossref$$9-- missing cx lookup --$$a10.1007/s11661-019-05605-2$$p1379 -$$tMetall. Mater. Trans. A$$uD.W. Brown, A. Losko, J.S. Carpenter, B. Clausen, J.C. Cooley, V. Livescu, P. Kenesei, J.S. Park, T.J. Stockman, and M. Strantza: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1379–94.$$v51A$$y2020
000601489 999C5 $$1B Ahmad$$2Crossref$$9-- missing cx lookup --$$a10.3390/met12020253$$p253 -$$tMetals (Basel)$$uB. Ahmad, X. Zhang, H. Guo, M.E. Fitzpatrick, L.M.S.C. Neto, and S. Williams: Metals (Basel), 2022, vol. 12, p. 253.$$v12$$y2022
000601489 999C5 $$1R Li$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.jmapro.2019.03.006$$p59 -$$tJ. Manuf. Process.$$uR. Li, J. Xiong, and Y. Lei: J. Manuf. Process., 2019, vol. 40, pp. 59–67.$$v40$$y2019
000601489 999C5 $$1MA Somashekara$$2Crossref$$9-- missing cx lookup --$$a10.1007/s00170-016-9510-7$$p2009 -$$tInt. J. Adv. Manuf. Technol.$$uM.A. Somashekara, M. Naveenkumar, A. Kumar, C. Viswanath, and S. Simhambhatla: Int. J. Adv. Manuf. Technol., 2017, vol. 90, pp. 2009–25.$$v90$$y2017
000601489 999C5 $$1F Martina$$2Crossref$$9-- missing cx lookup --$$a10.1080/02670836.2016.1142704$$p1439 -$$tMater. Sci. Technol.$$uF. Martina, M.J. Roy, B.A. Szost, S. Terzi, P.A. Colegrove, S.W. Williams, P.J. Withers, J. Meyer, and M. Hofmann: Mater. Sci. Technol., 2016, vol. 32, pp. 1439–48.$$v32$$y2016
000601489 999C5 $$1JR Hönnige$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.matdes.2018.03.065$$p193 -$$tMater. Des.$$uJ.R. Hönnige, P.A. Colegrove, B. Ahmad, M.E. Fitzpatrick, S. Ganguly, T.L. Lee, and S.W. Williams: Mater. Des., 2018, vol. 150, pp. 193–205.$$v150$$y2018
000601489 999C5 $$1J Hönnige$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.msea.2020.140368$$p140368 -$$tMater. Sci. Eng. A$$uJ. Hönnige, C.E. Seow, S. Ganguly, X. Xu, S. Cabeza, H. Coules, and S. Williams: Mater. Sci. Eng. A, 2021, vol. 801, p. 140368.$$v801$$y2021
000601489 999C5 $$1R Sun$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.jallcom.2018.02.353$$p255 -$$tJ. Alloys Compd.$$uR. Sun, L. Li, Y. Zhu, W. Guo, P. Peng, B. Cong, J. Sun, Z. Che, B. Li, C. Guo, and L. Liu: J. Alloys Compd., 2018, vol. 747, pp. 255–65.$$v747$$y2018
000601489 999C5 $$1VR Duarte$$2Crossref$$uV.R. Duarte, T.A. Rodrigues, N. Schell, R.M. Miranda, J.P. Oliveira, and T.G. Santos: Addit. Manuf., 2020, vol. 35, p. 101193.$$y2020
000601489 999C5 $$1DW Brown$$2Crossref$$9-- missing cx lookup --$$a10.1007/s11661-019-05169-1$$p2538 -$$tMetall. Mater. Trans. A$$uD.W. Brown, A. Losko, J.S. Carpenter, J.C. Cooley, B. Clausen, J. Dahal, P. Kenesei, and J.S. Park: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 2538–53.$$v50A$$y2019
000601489 999C5 $$1EM Ryan$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.jmatprotec.2018.07.030$$p577 -$$tJ. Mater. Process. Technol.$$uE.M. Ryan, T.J. Sabin, J.F. Watts, and M.J. Whiting: J. Mater. Process. Technol., 2018, vol. 262, pp. 577–84.$$v262$$y2018
000601489 999C5 $$1M Arana$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.matdes.2022.110974$$tMater. Des.$$uM. Arana, E. Ukar, I. Rodriguez, D. Aguilar, and P. Álvarez: Mater. Des., 2022, vol. 221, p. 110974.$$v221$$y2022
000601489 999C5 $$1N Mclean$$2Crossref$$9-- missing cx lookup --$$a10.1080/13621718.2022.2064704$$p479 -$$tSci. Technol. Weld. Join.$$uN. Mclean, M.J. Bermingham, P. Colegrove, A. Sales, and M.S. Dargusch: Sci. Technol. Weld. Join., 2022, vol. 27, pp. 479–89.$$v27$$y2022
000601489 999C5 $$1M Silmbroth$$2Crossref$$9-- missing cx lookup --$$a10.1080/13621718.2022.2160902$$p314 -$$tSci. Technol. Weld. Join.$$uM. Silmbroth, N. Enzinger, C. Schneider-Bröskamp, A. Arnoldt, and T. Klein: Sci. Technol. Weld. Join., 2023, vol. 28, pp. 314–22.$$v28$$y2023
000601489 999C5 $$1E Aldalur$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.jmapro.2020.08.060$$p615 -$$tJ. Manuf. Process.$$uE. Aldalur, F. Veiga, A. Suárez, J. Bilbao, and A. Lamikiz: J. Manuf. Process., 2020, vol. 58, pp. 615–26.$$v58$$y2020
000601489 999C5 $$1R Farla$$2Crossref$$9-- missing cx lookup --$$a10.1107/S1600577522001047$$p409 -$$tJ. Synchrotron Radiat.$$uR. Farla, S. Bhat, S. Sonntag, A. Chanyshev, S. Ma, T. Ishii, Z. Liu, A. Néri, N. Nishiyama, G.A. Faria, T. Wroblewski, H. Schulte-Schrepping, W. Drube, O. Seeck, and T. Katsura: J. Synchrotron Radiat., 2022, vol. 29, pp. 409–23.$$v29$$y2022
000601489 999C5 $$1M Froend$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.msea.2019.138635$$p138635 -$$tMater. Sci. Eng. A$$uM. Froend, V. Ventzke, F. Dorn, N. Kashaev, B. Klusemann, and J. Enz: Mater. Sci. Eng. A, 2020, vol. 772, p. 138635.$$v772$$y2020
000601489 999C5 $$1L Wang$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.matlet.2019.01.117$$p231 -$$tMater. Lett.$$uL. Wang, Y. Suo, Z. Liang, D. Wang, and Q. Wang: Mater. Lett., 2019, vol. 241, pp. 231–34.$$v241$$y2019
000601489 999C5 $$1E Macherauch$$2Crossref$$9-- missing cx lookup --$$a10.1007/BF02326143$$p140 -$$tExp. Mech.$$uE. Macherauch: Exp. Mech., 1966, vol. 6, pp. 140–53.$$v6$$y1966
000601489 999C5 $$1V Hauk$$2Crossref$$tStructural and Residual Stress Analysis by Nondestructive Methods: Evaluation—Application—Assessment: Section 2.072f$$uV. Hauk: Structural and Residual Stress Analysis by Nondestructive Methods: Evaluation—Application—Assessment: Section 2.072f, Elsevier Science, Amsterdam, 1997.$$y1997
000601489 999C5 $$2Crossref$$uP61A:: Viewer, https://hereon-gems.github.io/P61AToolkit/introduction.html#p61a-viewer. Accessed 28 Feb 2023
000601489 999C5 $$1RFS Hearmon$$2Crossref$$9-- missing cx lookup --$$a10.1080/00018732.1956.tADP0323$$p323 -$$tAdv. Phys.$$uR.F.S. Hearmon: Adv. Phys., 1956, vol. 5, pp. 323–82.$$v5$$y1956
000601489 999C5 $$1T Gnäupel-Herold$$2Crossref$$9-- missing cx lookup --$$a10.1107/S0021889812014252$$p573 -$$tJ. Appl. Crystallogr.$$uT. Gnäupel-Herold: J. Appl. Crystallogr., 2012, vol. 45, pp. 573–74.$$v45$$y2012
000601489 999C5 $$1T Klein$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.matlet.2021.130500$$tMater. Lett.$$uT. Klein, G. Graf, P. Staron, A. Stark, H. Clemens, and P. Spoerk-Erdely: Mater. Lett., 2021, vol. 303, p. 130500.$$v303$$y2021
000601489 999C5 $$1Z Huang$$2Crossref$$9-- missing cx lookup --$$a10.1007/s11665-022-07209-1$$p1810 -$$tJ. Mater. Eng. Perform.$$uZ. Huang, J. Huang, X. Yu, G. Liu, and D. Fan: J. Mater. Eng. Perform., 2023, vol. 32, pp. 1810–23.$$v32$$y2023
000601489 999C5 $$1K Oyama$$2Crossref$$uK. Oyama, S. Diplas, M. M’hamdi, A.E. Gunnæs, and A.S. Azar: Addit. Manuf., 2019, vol. 26, pp. 180–92.$$y2019
000601489 999C5 $$1M Strantza$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.actamat.2019.01.050$$p299 -$$tActa Mater.$$uM. Strantza, B. Vrancken, M.B. Prime, C.E. Truman, M. Rombouts, D.W. Brown, P. Guillaume, and D. Van Hemelrijck: Acta Mater., 2019, vol. 168, pp. 299–308.$$v168$$y2019
000601489 999C5 $$1MJ Benoit$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.jmapro.2021.02.031$$p1484 -$$tJ. Manuf. Process.$$uM.J. Benoit, S.D. Sun, M. Brandt, and M.A. Easton: J. Manuf. Process., 2021, vol. 64, pp. 1484–92.$$v64$$y2021
000601489 999C5 $$1RH Leggatt$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.ijpvp.2007.10.004$$p144 -$$tInt. J. Press. Vessel. Pip.$$uR.H. Leggatt: Int. J. Press. Vessel. Pip., 2008, vol. 85, pp. 144–51.$$v85$$y2008
000601489 999C5 $$1BA Szost$$2Crossref$$9-- missing cx lookup --$$a10.1016/j.matdes.2015.09.115$$p559 -$$tMater. Des.$$uB.A. Szost, S. Terzi, F. Martina, D. Boisselier, A. Prytuliak, T. Pirling, M. Hofmann, and D.J. Jarvis: Mater. Des., 2016, vol. 89, pp. 559–67.$$v89$$y2016