% IMPORTANT: The following is UTF-8 encoded.  This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.

@ARTICLE{Chabok:600048,
      author       = {Chabok, Ali and Zhang, Wei and Shen, Jiajia and Oliveira,
                      J. P. and Wang, Hui and Feng, Shaochuan and Schell, Nobert
                      and Kooi, Bart J. and Pei, Yutao},
      title        = {{O}n the orientation-dependent mechanical properties of
                      interstitial solute strengthened
                      {F}e$_{49.5}${M}n$_{30}${C}o$_{10}${C}r$_{10}${C}$_{0.5}$
                      high entropy alloy produced by directed energy deposition},
      journal      = {Additive manufacturing},
      volume       = {79},
      issn         = {2214-7810},
      address      = {Amsterdam [u.a.]},
      publisher    = {Elsevier},
      reportid     = {PUBDB-2023-07710},
      pages        = {103914},
      year         = {2023},
      abstract     = {Interstitial solute-strengthened
                      Fe$_{49.5}$Mn$_{30}$Co$_{10}$Cr$_{10}$C$_{0.5}$ (at\%) high
                      entropy alloy was additivelymanufactured by directed energy
                      deposition (DED) process in this work. While the
                      asdepositedmaterial exhibits an excellent combination of
                      strength and ductility, the effect ofanisotropy on the
                      mechanical performance of the DED processed component was
                      studied indetail. The ultimate tensile strength (UTS) of the
                      horizontal tensile sample with a main fibertexture of <111>
                      // tensile direction (TD), went up to 1 GPa while
                      maintaining a superbfailure elongation of 36 \%. The
                      vertical tensile sample, with a dominant <001> // TD
                      texture,failed at an UTS of 750 MPa with an enhanced failure
                      elongation of 52\%. Microstructuralanalysis of the deformed
                      samples showed that the horizontal samples were mainly
                      deformedvia the formation of mechanical twins, whereas the
                      twining activity was less profound in thevertical samples.
                      Single crystal micro-pillar compression testing revealed
                      that the deformationmechanism complies well with the
                      Schmid’s factor. In addition, a higher critical
                      resolvedshear stress for twining compared to slip was also
                      confirmed in the micro-pillar compressiontesting.},
      cin          = {DOOR ; HAS-User / Hereon},
      cid          = {I:(DE-H253)HAS-User-20120731 / I:(DE-H253)Hereon-20210428},
      pnm          = {6G3 - PETRA III (DESY) (POF4-6G3) / FS-Proposal: I-20210899
                      EC (I-20210899-EC) / CALIPSOplus - Convenient Access to
                      Light Sources Open to Innovation, Science and to the World
                      (730872)},
      pid          = {G:(DE-HGF)POF4-6G3 / G:(DE-H253)I-20210899-EC /
                      G:(EU-Grant)730872},
      experiment   = {EXP:(DE-H253)P-P07-20150101},
      typ          = {PUB:(DE-HGF)16},
      UT           = {WOS:001155206400001},
      doi          = {10.1016/j.addma.2023.103914},
      url          = {https://bib-pubdb1.desy.de/record/600048},
}