% IMPORTANT: The following is UTF-8 encoded.  This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.

@ARTICLE{Brueck:317048,
      author       = {Brueck, H. and Duda, M. and Bandelmann, R. and Calero, J.
                      and Gornicki, E. and Kotarba, A. and Martinez, T. and Toral,
                      F. and Garcia-Tabares, L. and Stolper, Matthias},
      title        = {{R}esults of the {M}agnetic {M}easurements of the
                      {S}uperconducting {M}agnets for the {E}uropean {XFEL}},
      journal      = {IEEE transactions on applied superconductivity},
      volume       = {26},
      number       = {4},
      issn         = {1558-2515},
      address      = {New York, NY},
      publisher    = {IEEE},
      reportid     = {PUBDB-2017-00389},
      pages        = {4902204},
      year         = {2016},
      note         = {(c) IEEE},
      abstract     = {A new linear accelerator, i.e., the European X-ray
                      Free-Electron Laser (XFEL), is under construction at DESY in
                      Hamburg. The construction started in early 2009, and the
                      commissioning is planned for 2016. The design energy of the
                      electron beam is 17.5 GeV (0.05-4.7 nm wavelength), and more
                      than 27000 flashes/s are expected. The accelerator contains
                      102 cryomodules equipped with a string of eight
                      superconducting RF cavities and one superconducting magnet
                      package. Each magnet consists of two cos -θ-type correction
                      dipoles, horizontal and vertical deflecting. They are glued
                      onto the surface of the beam pipe and are surrounded by a
                      superferric quadrupole magnet. The package is mounted inside
                      of a compact stainless steel vessel with a length of 30 cm
                      and a diameter of 20 cm. Each package and current lead
                      assembly was tested separately at room temperature and
                      together at 2 K in a dedicated superfluid helium cryostat at
                      DESY. A summary of the results is reported here. During the
                      cold test, special emphasis was given to hysteresis and
                      persistent current effects, as the operating current varies
                      from very low currents at the beginning of the accelerator
                      to the full design current 50 A at the end.},
      cin          = {MKS3 / MKS 4},
      ddc          = {530},
      cid          = {I:(DE-H253)MKS3-20210408 / $I:(DE-H253)MKS_4-20120731$},
      pnm          = {631 - Accelerator R $\&$ D (POF3-631) / 6G13 - XFEL
                      (POF3-622)},
      pid          = {G:(DE-HGF)POF3-631 / G:(DE-HGF)POF3-6G13},
      experiment   = {EXP:(DE-H253)XFEL(machine)-20150101},
      typ          = {PUB:(DE-HGF)16},
      UT           = {WOS:000377378000001},
      doi          = {10.1109/TASC.2016.2520489},
      url          = {https://bib-pubdb1.desy.de/record/317048},
}