% IMPORTANT: The following is UTF-8 encoded. This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.
@INPROCEEDINGS{Przygoda:315431,
author = {Przygoda, Konrad and Steffen, Bernd and Butkowski, L. and
Rybaniec, R. and Peier, Peter and Schlarb, H. and Schmidt,
Christian and Gerth, Ch.},
title = {{M}icro{TCA}.4 based {RF} and {L}aser {C}avities
{R}equlation {I}ncluding {P}iezo {C}ontrols},
reportid = {PUBDB-2016-05855},
pages = {1-2},
year = {2016},
note = {protected, accessible only with CERN Indico account},
abstract = {In the paper we are presenting universal solution for RF
and laser cavities regulation including piezo controls based
on MTCA.4 electronics. The RF field control electronics
consists of RTM for cavity probes sensing and high voltage
power source driving, AMC for fast data processing and
digital feedback operation. The piezo control system has
been setup with high voltage RTM Piezo driver and low cost
AMC based FMC carrier. The laser cavity electronics uses the
same hardware setup. The laser RF signal is a product of
analog down conversion to intermediate frequency of nth
harmonic of the laser repetition rate which is one above the
reference frequency the laser needs to be locked. The fine
tuning of the laser is carried out using cavity fiber
stretcher. The coarse tuning of the supported optics is done
using piezo motor driver application. The both channels can
be operated using digital feedback controllers. The
communication between AMC modules is performed using low
latency link over the AMC backplane with data throughput up
to the 3.125 Gbps. First results from CW operation of the RF
field controller and the cavity active resonance control
with the piezo tuners are demonstrated. The laser lock
application performance using both fine and coarse channel
feedbacks is shown and briefly discussed.},
month = {Jun},
date = {2016-06-05},
organization = {20th IEEE-NPSS Real Time Conference,
Padua (Italy), 5 Jun 2016 - 10 Jun
2016},
cin = {MSK},
cid = {I:(DE-H253)MSK-20120731},
pnm = {631 - Accelerator R $\&$ D (POF3-631) / 6G13 - XFEL
(POF3-622)},
pid = {G:(DE-HGF)POF3-631 / G:(DE-HGF)POF3-6G13},
experiment = {EXP:(DE-H253)XFEL(machine)-20150101},
typ = {PUB:(DE-HGF)8},
url = {https://bib-pubdb1.desy.de/record/315431},
}