% IMPORTANT: The following is UTF-8 encoded.  This means that in the presence
% of non-ASCII characters, it will not work with BibTeX 0.99 or older.
% Instead, you should use an up-to-date BibTeX implementation like “bibtex8” or
% “biber”.

@INPROCEEDINGS{Eckoldt:301877,
      author       = {Eckoldt, H. J. and Faubladier, F. and Heidbrook, N.},
      title        = {{C}onstant-{P}ower {P}ower {S}upplies for the {TESLA}
                      {M}odulators},
      address      = {Hamburg},
      publisher    = {DESY},
      reportid     = {PUBDB-2016-02944, DESY-M-00-04Z},
      pages        = {2199-2201},
      year         = {2000},
      abstract     = {For the TESLA Test Facility at DESY modulators, which
                      generate high voltage, pulses of 130 kV with an electrical
                      power of up to 16.8 MW are used. The pulses have a
                      repetition rate of up to 10 Hz and a width of 1.7 ms. Since
                      it is not possible to take the pulsed energy directly from
                      the mains the required energy is stored in capacitor banks
                      to be released during the pulse. Power supplies are needed
                      to recharge the capacitor banks of the modulators without
                      disturbing the mains. In particular the low repetition rate
                      of the pulses has to be suppressed. Tobe independent from
                      the repetition rate the power supplies have to operate in a
                      constant power mode. The DC charging current into the
                      capacitors decreases during the loading with the same factor
                      with which the voltage increases. In this way the current
                      taken from the threephase mains is constant. Different types
                      of power supplies have been investigated at DESY and are
                      described here. These types are antiductors with secondary
                      diode bridges, switched mode power supplies, diode bridges
                      plus series switched mode supplies, diode bridges with SCR
                      bridges in sequential phase control.},
      month         = {Jun},
      date          = {2000-06-26},
      organization  = {The 7th European Particle Accelerator
                       Conference EPAC 2000, Vienna (Austria),
                       26 Jun 2000 - 30 Jun 2000},
      keywords     = {talk: Vienna 2000/06/26 (INSPIRE) / electron positron:
                      linear collider (INSPIRE) / linear collider: proposed
                      (INSPIRE) / RF system: superconductivity (INSPIRE) /
                      microwaves: oscillation (INSPIRE) / power supply (INSPIRE) /
                      DESY TESLA Linac (INSPIRE)},
      cin          = {M(-2012)},
      cid          = {$I:(DE-H253)M_-2012_-20130307$},
      pnm          = {No facility / HGF program None (POF1-890)},
      pid          = {G:(DE-H253)POF1-HGF-No-Prog-20130405},
      experiment   = {EXP:(DE-MLZ)NOSPEC-20140101},
      typ          = {PUB:(DE-HGF)29 / PUB:(DE-HGF)8},
      doi          = {10.3204/PUBDB-2016-02944},
      url          = {https://bib-pubdb1.desy.de/record/301877},
}