TY  - CONF
AU  - Galli, Silvia
AU  - Szakacs, Gabor
AU  - Lukac, Frantisek
AU  - Vlcek, Marian
AU  - Jimbo, Ryo
AU  - Naito, Yoshihito
AU  - Wennerberg, Ann
AU  - Herzen, Julia
AU  - Hammel, Joerg
AU  - Willumeit, Regine
TI  - Osseointegration of resorbable magnesium screws – A SRμCT Study
JO  - European cells & materials
VL  - 28
IS  - 3
SN  - 1473-2262
CY  - Davos, Switzerland
PB  - AO fundation
M1  - PUBDB-2015-00196
SP  - 64
PY  - 2014
N1  - OA
AB  - The development of resorbable osteofixation materials that degrade upon substitution by regenerated tissue is highly desirable in orthopaedics. Magnesium is promising as implantable material, because of its biocompatibility, osteoconductivity and biodegradation under physiological conditions [1]. Through the selection of alloying elements, the mechanical properties and corrosion behaviour of magnesium can be modulated for application in load-bearing situations. The aim of our research was to investigate the bone integration and the corrosion process of Al-free Mg-alloys in vivo. Our hypothesis was that Mg-based implants stimulate bone growth.METHODS: Mini-screws of two different Mg- alloys, Mg10Gd and Mg-Y-RE (WE43) were manufactured at HZG. The cytocompatibility of the selected alloys was formerly tested and validated in vitro [2, 3]. The mini-screws were implanted in rats after ethical approval. After 1 and 3 months of healing, cylindrical bone-implant blocks were retrieved. Samples were imaged at the P05 Imaging Beamline (IBL) operated by HZG at PETRA III – DESY (Hamburg). We used monochromatic X-rays at 25 keV to take 900 projections and a field of view of 7mm x 1.8 mm, which resulted in 5X magnification with a resolution of  2.5 μm. 3D data sets were computed using filtered back projection algorithms.RESULTS: The inserted implants healed without any observable adverse effect. On the basis of tomographic data, we were able to compute three- dimensional renderings of dvrscrews and bone with high contrast-to-noise ratios. A qualitative evaluation of the data revealed inhomogeneous surface corrosion of the screws, which maintained their original shape within the study period. New bone formation was observed in all of our samples. We found a considerable increase of implant-bone contact sites with progressing healing time. A quantitative analysis of the tomographic data indicated spatial differences in bone density. In proximity of the implant, newly formed bone matured and became dense after 3 months.Top: Horizontal (left) and vertical (right) sections of a screw after 3 months of healing. Fragments of implants, completely integrated in the bone, are visible. Bar 0.25 mm. Bottom: Orthogonal cut planes (left) and volume rendering (right), showing an implant (gray) into the bone (purple).DISCUSSION </td><td width="150">
AB  -  CONCLUSIONS: The SRμCT showed osseointegration of Mg10Gd and WE43. Although the spatial resolution was not sufficient to fully elucidate the alloys microstructure, we observed the distribution of the high absorbing regions in the materials, possibly intermetallic phases and Y or RE oxides. The corrosion of the alloys was slow. Biocompatibility of the tested materials was confirmed by bone growth in intimate contact with the implants.REFERENCES: 1 Witte F,2 et al (2005) Biomaterials 26:3557-3563. Feyerabend F, Fischer J, et al (2010) Acta Biomater. 6:1834-1842. 3Johnson I, et al. H (2011) JBMR-A.ACKNOWLEDGEMENTS: Founding from the People Programme (Marie Curie Actions) Seventh Framework Programme FP7/2007-2013/ under REA grant agreements n° 289163 and n° 312284.
T2  - 6th Symposium on Biodegradable Metals
CY  - 24 Aug 2014 - 29 Aug 2014, Maratea (Italy)
Y2  - 24 Aug 2014 - 29 Aug 2014
M2  - Maratea, Italy
LB  - PUB:(DE-HGF)16 ; PUB:(DE-HGF)8
DO  - DOI:10.3204/PUBDB-2015-00196
UR  - https://bib-pubdb1.desy.de/record/205636
ER  -